Cream
Lightest grind. Smooth, uniform tone.
Best for: Homes, condos, offices where you want a calm, clean floor.

Toronto · Scarborough · East York · North York
Mechanically ground and polished concrete floors for homes, shops and lobbies across Toronto and the GTA, a hard-wearing, low-maintenance surface made from the slab you already have.
Polished concrete is not paint or a topping. We refine the existing slab itself with progressively finer diamond tooling, densify it so the surface hardens, then polish to the sheen you want, from a soft matte to a high gloss. The result is the concrete, made denser, flatter and far more resistant to wear.
Because there is no coating to peel or delaminate, a properly polished floor holds up for years under foot traffic and cleans with water. It is why polishing has moved from warehouses into kitchens, basements, showrooms and condo lobbies.

Every polished floor is set by two things: how deep we grind, and how far we polish. Here’s what each one looks like, and who it suits.
One · Grind depth
Lightest grind. Smooth, uniform tone.
Best for: Homes, condos, offices where you want a calm, clean floor.
The classic polished look. Fine speckle, modern and forgiving.
Best for: Retail, showrooms, most commercial spaces.
Deepest grind. Terrazzo-like stone exposure.
Best for: Feature floors, lobbies, restaurants, anywhere the floor is part of the design.
Two · Sheen level
The same floor, photographed under the same two ceiling lights. Only the polish changes.
Not sure which combination fits your space? That’s what the site assessment is for. We look at the slab, the lighting, and how the floor gets used, then recommend one grind depth and one sheen, in writing, before any work starts.
Slab assessment
We check hardness, flatness and existing damage first. Not every slab polishes the same way, and some need repair or grinding before polishing is worth doing.
Grinding & densifying
Progressive diamond passes flatten and open the surface; a chemical densifier hardens it so it takes a durable polish.
Polishing to your sheen
Matte, satin or high gloss, chosen with you and finished consistently across the whole floor.
Crack & joint treatment
Cracks and control joints are filled and treated as part of the process, not left as trip lines through a finished floor.
Guard & maintenance plan
A stain guard where it suits the room, plus a simple care routine and a date we track so the sheen lasts.
On this job we were called in to fix a poorly poured slab, grinding and honing it flat and smooth with a planetary floor grinder. The same machines and diamond tooling are what prepare and refine a slab before it is densified and polished.
A lot of our polishing is trade work, a general contractor finishing a basement or a shop calls us in once the drywall and paint are done. A slab that has spent a build being walked on, dropped on and splattered with compound still polishes beautifully: the staining is in the top layer, and that layer is exactly what the first grinding pass takes off.
We sequence around your other trades, run the grinders on dust extraction so the finished walls stay clean, and hand the floor back ready for the client walkthrough. Our work page shows a basement floor at each stage.

Polishing suits a sound, reasonably flat slab where you want the concrete look and minimal upkeep. If the slab is badly damaged, oil-soaked or you want a specific colour or full-flake finish, a coating system, epoxy or polyaspartic, is usually the better answer. The assessment covers slab hardness, flatness and contamination, and those three settle whether your floor is a polishing candidate.
The depth of the first grind decides how much stone shows. A light cut keeps the cream, the smooth cement paste at the surface, for a quiet, even floor. A medium cut reaches the sand and fine aggregate, the salt-and-pepper look. A deep cut exposes the larger stone in the mix. The slab sets the limits: we can only reveal the aggregate that was placed in it, and an uneven slab may need a deeper cut in places to come flat.
The sheen is set by how far the polishing steps are taken. Stopping early gives a matte, honed surface that hides dust and scuffs. Carrying on through finer diamonds gives satin, then a gloss that reflects the room. Sheen is a finish choice and not a coating: the shine is the concrete itself, refined step by step.
What you choose
Aggregate exposure
Sheen
A densifier is worked into the slab during polishing. It reacts with the concrete and hardens the surface, which is why a polished floor resists dusting and abrasion without a film on top. Because nothing is laid over the concrete, there is no layer to peel, and moisture can still move through the slab, which matters in a basement.
Polished concrete is not stain-proof. A penetrating guard slows absorption and gives time to wipe up oil, wine or salt water, and it is renewed as part of ordinary upkeep. Day to day the floor needs a dust mop and a neutral cleaner. Acidic cleaners and vinegar dull the polish and are the one thing to keep off it.
Look at the slab
We check the slab for cracks, old coatings and adhesive, and talk through the sheen and how much aggregate you want to see.
Repair and grind
Cracks and spalls repaired, then the slab ground with progressively finer diamonds.
Densify and polish
The slab is densified, polished to the sheen you chose and guarded against stains.
Condition Report
Before and after photos, the materials used, the warranty terms and a date for the next check.
Typical GTA range
$3 – $12 / sq ft
Polishing an existing Toronto slab. The spread is the number of grinding passes, the sheen level and the slab's condition. A cream finish sits at the low end, a deep salt-and-pepper grind with a high gloss at the top. Typical Greater Toronto market range compiled from published 2026 GTA pricing, so you can sanity-check any quote, including ours. Your written estimate is itemized to the actual job, and repairs found underneath can move it.
Every GTA market range & where it comes from →Your price
The band above is the market range. Your price is set by what the assessment actually finds, and it arrives in writing, itemized, with what must happen now separated from what can safely wait.
Residential work across Scarborough, East York and North York, with commercial work across the wider GTA.

BeforeAfterMost sound interior slabs can, but not all polish equally. Very soft, badly spalled or heavily patched slabs may need repair first or may be better suited to a coating. The assessment checks hardness and surface condition to settle it.
5.0 on Google
Copied word for word from our Google Business Profile.
Free on-site assessment, then a written scope and price for you to approve.
WSIB covered · $5M liability · Written warranty · Scarborough, Toronto, ON